9916250024

Connection range

AWG26-12 (0.1-4.0 mm²)

Input current

1 A @ 115 V AC; 0.6 A @ 230 V AC

Input frequency

50/ 60 Hz

Input fuse

2 A time-lag fuse (internal)

Input voltage (voltage mode input)

85...265 V AC; 120...300 V DC. typ. 115...230 V AC ±10%

Inrush Current Limitation

Thermistor

Surge protection

Varistor

Wire connection method

Screw connection

Battery charging current

2 A

Battery voltage

27.3 V

Connection range

AWG26-12 (0.1-4.0 mm²)

Control at input voltage

0.2%

Mains failure bridge-over time for 115 V AC

24 ms

Mains failure bridge-over time for 230 V AC

190 ms

Max. residual ripple

< 50 mVeff

Output current

max. 15 A / max. 9.0 A for the power supply unit

Output power

360 W

Output voltage type

DC

Wire connection method

Screw connection

Version

UPS control unit, 24 V

Order No.

9916280024

Type

CP-BBU 115-230VAC / 24VDC

GTIN (EAN)

4032248217878

Qty.

1 items

Delivery status

This article will no longer be available in the future.

Available until

31.12.2014

Alternative product

1370050010

Depth

161 mm

Depth (inches)

6.339 inch

Height

127.5 mm

Height (inches)

5.02 inch

Width

72.5 mm

Width (inches)

2.854 inch

Net weight

1,150 g

The UPS control unit together with the associated battery module and the power supply unit form a complete DC UPS system. In normal operation, the input voltage from the UPS control unit is connected directly to the load. In the event of a mains failure (drop of the DC input voltage) the system switches instantly to bat tery operation.

Once the mains supply has been restored, the system switches back to normal operation and the battery is fully recharged by the integrated charger.

Three relay outputs, as well as three additional active transistor outputs and a control input to lock battery operation, provide full remote control by means of SPS or DCS control. Numerous modes of operation and an easy-to-use status display provide rapid fault diagnosis and optimum

customisation to the application.